Connecting External Components - JVC KW-M450BT Instruction Manual

Installation and Connection Installation and Connection
Installing in Toyota cars
Install onto the car bracket using the supplied screws
( [ ). Use the mounting holes (A or B) that fit the car
bracket.
Side view
Installing the trim plate
44 ENGLISH

Connecting external components

1 Navigation input (NAV)*1
2 TV tuner remote control output (REMO OUT)*1
3 Steering wheel remote input (REMO IN)
• Connect to the car's steering remote harness
using the steering wheel remote input cable ( ] ).
Contact your JVC dealer for details.
4 Microphone input (MIC) (Page 45)
5 Audio video input (AV-IN)
Connect the following type of 4-pole mini plug:
1 Left audio
2 Right audio
3 Ground
4 Composite video
6 Video output (V-OUT)
7 Rear view camera input (R-CAM)
8 Output terminals*2
• Left output (White)
• Right output (Red)
REAR: Rear speaker preouts
FRONT: Front speaker preouts
SW: Subwoofer preouts
For 3-way crossover:
REAR: Tweeter preouts
FRONT: Mid range speaker preouts
SW: Woofer preouts
*1 Except for KW-M450BT Australia and New Zealand models/
KW-M450BT Indonesian models.
*2 When connecting an external amplifier, connect its ground wire
to the chassis of the car; otherwise the unit may be damaged.