Table of Contents
Advertisement
Other External Components
Other External Components
AV-IN
Connecting an external component
See page 40 for more information.
Starting playback
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
Changing the AV-IN name
You can change the AV-IN name displayed on the
source control screen.
• This setting does not affect the source name
displayed on the Home screen.
1
Display the <VIDEO Mode> screen.
On the source control screen, touch as follows:
2
Select an AV-IN name.
20
ENGLISH
Rear view camera
Install the rear view camera (separately purchased) in
the appropriate position according to the instructions
supplied with the rear view camera.
Connecting a rear view camera
See page 40 for more information.
• To use the rear view camera, a reverse lead (REVERSE)
connection is required. (Page 41)
Using the rear view camera
• For rear camera settings, see <Rear Camera> on
page 32.
To display the rear view camera screen
The rear view screen is displayed by shifting the gear
to the reverse (R) position when <Rear Camera
Interruption> is set to [ON]. (Page 32)
• A caution message appears on the screen. To
remove the caution message, touch the screen.
You can also display the picture from the rear view
camera manually without shifting the gear to the
reverse (R) position.
On the pop-up short-cut menu, touch as follows:
Operations while the camera screen is
displayed
To adjust the picture
Touch the area shown below.
Video menu control screen is displayed. For details, see
"Video menu control operations" on page 10.
• To exit video menu control screen, touch the same
area again.
To display parking guidelines
Set <Parking Guidelines> to [ON] (Page 32) or
touch the area shown below.
• To close the parking guidelines, touch the same area
again.
To exit the camera screen
Press
on the monitor panel or touch the area
shown below.
Advertisement
Table of Contents
