Specifications - JVC KW-M450BT Instruction Manual

Troubleshooting Troubleshooting
"No Contents" appears.
 No phonebook data is contained in the connected 
Bluetooth phone.
"Initialise Error" appears.
 The unit has failed to initialize the Bluetooth 
module. Try the operation again.
"Dial Error" appears.
 Dialing has failed. Try the operation again. 
"Hang up Error" appears.
 The call has not ended yet. Park your car, and use 
the connected mobile phone to end the call.
"Pick up Error" appears.
 The unit has failed to receive a call. 
The Bluetooth connection between the Bluetooth
device and the unit is unstable.
 Delete the unused registered Bluetooth device 
from the unit. (Page 25)
50 ENGLISH

Specifications

Specifications
Monitor section
Picture Size (W × H) 6.2 inches (diagonal) wide
137.5 mm × 77.2 mm
Display System Transparent TN LCD panel
Drive System TFT active matrix system
Number of Pixels 1 152 000
(800H × 480V × RGB)
Effective Pixels 99.99%
Pixel Arrangement RGB striped arrangement
Back Lighting LED
USB interface section
USB Standard USB 2.0 High Speed
Compatible Devices Mass Storage Class
File System FAT 16/FAT 32/NTFS
Maximum Power
DC 5 V 1.5 A
Supply Current
D/A Converter 24 bit
Audio Decoder MP3/WMA/WAV/AAC (.m4a)/
FLAC
Video Decoder MPEG1/MPEG2/MPEG4/
H.264/MKV/WMV
Frequency Response 96 kHz Sampling:
20 Hz to 20 000 Hz
48 kHz Sampling:
20 Hz to 20 000 Hz
44.1 kHz Sampling:
20 Hz to 20 000 Hz
Total Harmonic 0.02% (1 kHz)
Distortion
Signal to Noise Ratio 104 dB
Dynamic Range 90 dB
Bluetooth section
Technology Bluetooth V4.1
Frequency 2.402 GHz to 2.480 GHz
RF Output Power +4 dBm (MAX), Power Class 2
(E.I.R.P.)
Maximum Line of sight approx. 10 m
Communication (32.8 ft)
Range
Audio Codec SBC/AAC
Multi Profile Support Multi Profile
Profile HFP (Hands Free Profile) 1.7
A2DP (Advanced Audio
Distribution Profile) 1.3
AVRCP (Audio/Video Remote
Control Profile) 1.6
GAP (Generic Access Profile)
PBAP (Phonebook Access
Profile) 1.2
SDP (Service Discovery Profile)
SPP (Serial Port Profile) 1.2