JVC KW-M450BT Instruction Manual page 35

Settings Settings
3
Touch [Level] ( 1 ), then adjust the output
volume ( 2 ) for each speaker.
E.g. When <X'over Network> is set to [2way]
To initialize the setting value: Touch [Initialise].
Localizing the sound image—Front Focus
• Speaker types shown on the screen differ depending
on the <X'over Network> setting. (Page 30)
1
Touch [Front Focus] ( 1 ), select the
listening position ( 2 ) to set as the front
position, then touch [Adjust] (
E.g. When <X'over Network> is set to [2way]
• When you are sitting on the [Front All] (front
seats) or [All] (front and rear seats) position, select
left ("Priority L") or right ("Priority R") to specify
the position to localize the sound image.
2
Touch [Delay] (
image ( 2 ) precisely.
[Sound Image LR(Front)]
Adjusts the sound image to be localized set on the
front position.
[Sound Image LR(Rear)]
Adjusts the sound image to be localized set on the
3
).
rear position.
[Size of the Virtual Sound Field]
Adjusts the virtual sound field to the desired field
size.
• If the sound image moves out of the front
position, adjust [Sound Image LR(Front)]/
[Sound Image LR(Rear)].
[Subwoofer Delay]
Adjusts the delay time of the subwoofer sound.
1 ), then adjust the sound
3
Touch [Level] ( 1 ), then adjust the output
volume ( 2 ) for each speaker.
E.g. When <X'over Network> is set to [2way]
To initialize the setting value: Touch [Initialise].
<Fader/Balance>
Touch [ J ]/[ K ]/[ H ]/[ I ] or drag the
<Fader>*
Adjusts the front and rear speaker output balance.
When using a 2-way speaker system, set the fader to
the center.
• Front 1 to Front 15, Center, Rear 1 to Rear 15
(Initial: Center)
<Balance>
Adjusts the left and right speaker output balance.
• Left 1 to Left 15, Center, Right 1 to Right 15
(Initial: Center)
To clear the adjustment: Touch [Center].
* Adjustable only when <X'over Network> is set to [2way].
(Page 30)
mark to adjust.
ENGLISH 33