HEIDENHAIN TNC 370 D Technical Information page 81

Machine Function and input
parameter
MP7480.0 Output of tool or pocket number with
TOOL CALL block
Input:
0 = No output
1 = Tool number output only when tool
number changes (W264)
2 = Tool number output with every TOOL
CALL block (W264)
3 = Output of pocket number (W264) and
tool number only when tool number
changes
4 = Output of pocket number (W264) and
tool number with every TOOL CALL
block
5 = Output of pocket number (W264) and
tool number only when tool number
changes. Fixed tool pocket coding
6 = Output of pocket number (W262) and
tool number (W264) with every TOOL
CALL block. (Fixed tool pocket coding).
MP7480.1 Output of tool or pocket number with
TOOL DEF block
Input:
0 = No output
1 = Tool number output only when tool
number changes
2 = Tool number output with every TOOL
DEF block
3 = Output of pocket number and tool
number only when tool number
changes
4 = Output of pocket number and tool
number with every TOOL DEF block
MP7490 Number of datums in traverse range
Input: 1 or 3
1 = 3 traverse ranges, 3 datums
3 = 3 traverse ranges, 1 datum
4–78 TNC 370 D Machine Parameters
Change via Reaction
PLC
RUN
PLC
RUN
July 02