Specifications: 8302Ac Power Supply - Avaya 8300 Installation Manual

Electrical specifications for the AC power supply
Non-PoE
PoE
Fans
Note the following information:
• The maximum steady-state output power is limited to a total of 1140 W for any combination
of output voltages/currents at low-line 100–120 V AC nominal input voltage conditions.
• The maximum steady-state output power is limited to a total of 690 W for any combination
of output voltages or currents, excluding the 50 V DC source at low-line 100–120 V AC
nominal input voltage conditions. This limitation is required to ensure that there is
sufficient PoE power or 450 W total at this input voltage condition.
• The maximum steady-state output power is limited to a total of 870W for any combination
of output voltages/currents, excluding the 50 V DC source at high-line 200–240 V AC
nominal input voltage conditions. This limitation is required to ensure maximum PoE
power or 900 W total for the 50 V DC source at this input voltage condition.
• To obtain the full output power rating of 1770 W, you must connect the power supply to a
nominal (200–240 V AC) input voltage source.

Specifications: 8302AC power supply

The following table lists the power specifications for the Ethernet Routing Switch 8302AC
power supply.
Table 5: Ethernet Routing Switch 8302AC power specifications
Input voltage range (nominal) 100–120 V AC
Input current (nominal)
Frequency range (nominal)
Input VA
Input power consumption
Heat dissipation (thermal/
output)
Hold-up time
44 Installation — AC Power Supply
3.3 V DC @ 150 A
12 V DC @ 65 A
50 V DC @ 18 A
12 V DC @ 7.5 A
AC input power ratings
12 A
50–60 Hz
1192 VA
1180 W
1126 BTU/hr
20 ms
DC output power ratings
3.3 V DC @ 150 A
12 V DC @ 65 A
50 V DC @ 18 A
12 V DC @ 7.5 A
200–240 V AC
9 A
50–60 Hz
1768 VA
1750 W
1195 BTU/hr
20 ms
May 2011