Removing An Sfp - Avaya 2330 Installation Manual

Removing an SFP

Remove an SFP to replace it or to commission it elsewhere.
For translations of the following messages, see
page 16.
Prerequisites
Wear an antistatic wrist strap.
Warning:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables are connected
to a light source.
Electrostatic alert:
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an antistatic wrist strap
connected to an ESD jack.
Procedure steps
1. Disconnect the network fiber optic cable from the SFP connector.
2. Affix dust covers over the fiber optic bore and connector.
3. Depending on your SFP model, to release the SFP, press the locking and extractor
4. Slide the SFP out of the module SFP slot.
Installation — SFPs
mechanism.
Product safety warnings and information
Removing an SFP
on
December 2011 27