Advertisement
1. Locknut
2. Bolt (3/8 x 5/8 inch)
3. Curved washer
4. Mounting block
6.
Install the O-ring into the back of the groomer
housing
(Figure 6
lubricate the exposed surfaces of the O-ring with
synthetic grease (supplied with the kit).
Figure 7
1. O-ring
7.
Insert the adapter ring into the reel bearing
housing
(Figure 6
5. Adjustment knob assembly
6. Spacer
7. Bearing adapter
8. Flat-head screw
and
Figure
7) and lightly
and
Figure
8).
Figure 6
9. Groomer housing
10. O-ring
11. Slot cover (flat edge down)
12. Gasket
g020843
1. Groomer housing
2. Slot cover
3. O-ring
4. Adapter ring
5
13. Adapter ring
Figure 8
5. Spacer
6. Flat-head screw
7. Locknut
8. Bearing adapter
g245796
g020844
Advertisement
