Advertisement
3.
If you are installing this kit on a Greensmaster
800 mower with a serial number prior to
230999999, a Greensmaster 1000 mower
with a serial number prior to 229999999, or
a Greensmaster 1600 mower with a serial
number prior to 260001401, complete the
following:
A.
Using a 7/8 inch standard wrench, loosen
the spring tension screws on the right and
left bedbar adjusters
Figure 4
1. Spring tension
screw—loosen
B.
Back out the screws until the thrust washers
are no longer tensioned against the bedbar.
C.
Remove the 2 bolts and washers securing
left, bedbar-adjuster frame to the side plate
(Figure
4).
(Figure
4).
g020979
2. Bolts and
washers—remove
4.
Remove the 40-tooth idler gear.
1. 40-tooth idler gear.
5.
Remove the curved washer and the bolt (3/8 x
5/8 inch) from the adjustment-knob mounting
block
(Figure
6).
4
Figure 5
g022023
Advertisement
