Advertisement
Figure 26
4.
Lift and turn the micro adjustment knob
25) to raise or lower blade tip.
Note:
Each notch on the micro adjustment
knob is approximately equal to 0.17 mm (0.007
inch) of groomer depth.
5.
Repeat this procedure on the opposite end of
the groomer, then recheck the setting on the first
side.
6.
Put the grooming reel into the transport position.
Turning the Groomer On
and Off
You can turn the groomer on or off by rotating the
groomer-drive clutch as shown in
g017190
(Figure
1. Groomer-drive clutch
2. On
Transporting the Groomer
When transporting machine be sure to raise the
grooming reel into its transport (raised) position.
To raise the grooming reel, rotate the right and left
quick-up levers so that they face to the rear
25). To lower the grooming reel, turn the quick-up
levers forward.
15
Figure
27.
Figure 27
3. Off
(Figure
g020855
Advertisement
