The Avaya Dect Handset - Avaya 374 DECT Series Manual

The Avaya DECT handset

Important:
The handset may retain small magnetic objects around the microphone or the speaker region.
Parts on the
Handset
Case
Antenna
Loudspeaker
Microphone
Clip
Battery
Important:
When charging the EX classified handset, it is only permitted to use a charger marked with
DC3-CAAB/rev. 1A (or higher rev.), DC4-CAAB/rev. 3A (or higher rev.) or CR3-CAAC on the
label. It is not permitted to charge the EX battery pack by itself.
July 2017 Using Avaya 374x DECT handsets connected to Avaya Aura
Description
The plastic cover parts are made of durable PC/ABS material.
The antenna is integrated inside the handset.
The handset has a separate loudspeaker for the loudspeaker function. The loudspeaker
is placed on the back side of the handset.
The microphone is placed on the front bottom side of the handset.
There are two different belt clip options to the handset: a hinge-type clip (standard) or a
swivel-type clip.
There are three different belt clip options to the handset: a hinge-type clip (standard), a
swivel-type clip, or no clip.
Use the clip to attach the handset to a belt or similar.
You can use the handset without any clip.
The battery is a rechargeable Li-Ion battery, placed under a battery cover. The battery is
fully charged within four hours.
The non-EX classified battery can be charged separately with a battery pack charger.
Comments on this document? infodev@avaya.com
Manager and IP Office
The Avaya DECT handset
™ Communication
17