Editing A Contact - Avaya 374 DECT Series Manual

Table of Contents

You can include a tone or a pause in the phone number by pressing the Space

five times or seven times. In the display, a tone is indicated by a "T" and a pause by a "P".

9. Press OK.

10. Press Save.

Note:

If the Stimuli call phonebook lookup parameter is disabled, the system-provided call

information is used. This means that if a calling party name is saved in the phonebook,

the system does not display it. This function is applicable in legacy systems only

(stimuli).

The administrator can add a variable or the character "U" to the Work number, Mobile

number, or Other number field to allow users to enter additional numerical characters

before calling the number.

Adding a contact from the call list

Procedure

1. Press Menu.

2. Select Contacts.

3. Select Add contact > From call list, and then select a number from the call list.

4. Press Add.

5. Select any of the following:

• Work number

• Mobile number

• Other number

6. Press Add.

7. Enter the name for the contact, and then press OK.

8. Press OK.

If the Force stimuli ringing is enabled, the handset uses the system-provided ring signals

instead of the local ring signals. This function is applicable in legacy systems only (stimuli).

9. Press Save.