Fujitsu PRIMERGY RX600 S3 SAS Operating Manual page 94

Hot-plug PCI boards
Detaching the PCI board from the removal aid
V
CAUTION!
When detaching the PCI board from the removal aid, pay particular
attention to the clips that fasten the board to the removal aid (see
figure 33 on page
in other words, only lift them as far as is required to release the PCI
board. Otherwise, you may damage the clips.
Figure 33: Detaching the PCI board from the removal aid
Ê Raise the green fastening clips no more than approximately 1 mm (1) until
the PCI board is completely released.
Ê Remove the PCI board (2) and set it aside.
94
94). Do not raise them more than approximately 1 mm,
Operating manual
Hot plug components
RX600 S3 SAS