Fujitsu PRIMERGY RX600 S3 SAS Operating Manual page 56

Controls and displays Startup and operation
System information mode
During normal operation, the system display is in system information mode. The
information to be displayed in this mode can be freely selected by the adminis-
trator. It should be used to clearly identify the system.
The information entered is not evaluated by the system in any way. In other
words, there are no dependencies on actual system settings, such as IP
addresses or server names in the network. Two lines of information are
displayed. If you quickly press the menu selection button (for less than one
second) in the control panel, the next two entries are displayed.
To change the display mode, hold down the menu selection button for more than
one second. The menu toggle switch works independently of the setting.
Figure 14: LCD of the system display (LocalView)
Message +1
Menu -1
Menu +1
Message -1
Figure 15: Menu selection button
56 Operating manual
RX600 S3 SAS