Fujitsu PRIMERGY RX600 S3 SAS Operating Manual page 54

Controls and displays
LAN active indicators (green) for LAN ports 1 and 2 on the rear of
the server
Flashes during a LAN transfer.
I
Global error indicator (green/orange)
?
Does not light up if the power is off or if a POST error has occurred.
Lights up when the system is working. The power is ON, no service
incident or event has occurred.
Flashes green if a processor or a memory module has failed.
Lights orange when a critical event has occurred. Exact details of
the event can be found in the BIOS Setup or in the System and Event
Log, which can be accessed from the ServerView .
Flashes orange when a non-critical (Pre-Failure) is detected. Exact
details can be found in the System and Event Log, which can be
accessed from the ServerView.
If the event is still acute after a power failure, the indicator is
activated after the restart.
Power-on indicator (green)
Lights up when the server is switched on.
Flashes when the server is switched on and is in sleep mode (ACPI
status S1).
Is not lit up when the server is off.
54
Lights up synchronously with the LAN indicators on the rear
of the server (see
on page 60).
Operating manual
"LAN indicators on the connection panel"
Startup and operation
RX600 S3 SAS