Installing the server in the rack/...
Figure 4: Mounting the Telescopic Rails on the PRIMECENTER Rack
Ê Secure the variable support system with the mounted telescopic rails using
four M5 centering fixtures (see figure 4) in the square mounting holes
provided in the rack's vertical supports.
I
No nuts are required to secure the telescopic rails as the fixing holes
on the rails are threaded.
Ê Mount the PRIMECENTER Rack cable management as described in the
Technical Manual for the PRIMECENTER Rack.
Ê Insert the server (see section
Ê Once the server has been inserted, route the cables as described in the
Technical Manual for the PRIMECENTER Rack.
42
"Inserting the server" on page
Operating manual
Hardware installation
43).
RX600 S3 SAS