Admin Settings - Maintenance - Reset; Admin Settings - Administrator Information - Administrator; Admin Settings - Administrator Information - Password - Epson OmniLink TM-T70-i Technical Reference Manual

Admin Settings - Maintenance - Reset

You can reset the network functions and restore the settings for EPSON TMNet WebConfig to the
factory default settings.
Item
Reset
Factory Default

Admin Settings - Administrator Information - Administrator

You can set the information for the administrator of the TM-T70-i.
Item
Administrator Name
Location/Person
Apply

Admin Settings - Administrator Information - Password

You can change a password of EPSON TMNet WebConfig.
Item
Old Password
New Password
Re-input Password
Apply
A user name and a password will be required on the authentication screen when you start up
this utility and when you change settings. Enter "epson" for the user name and the password
you set for the password.
94
Restarts the network functions while retaining the network setting values such as IP
address. The settings for EPSON TMNet WebConfig other than the network settings
are retained.
Restores the settings for EPSON TMNet WebConfig to the factory default settings.
All the settings except for the internal time are initialized.
Self-signed certificates, Web contents, and PHP contents registered to this product
are also deleted. If a microSD card is inserted in this product, only the files in the
webapp folder are deleted. Other folders and files are not deleted.
Sets the name of the administrator of the TM-T70-i.
Sets the location where the TM-T70-i is installed.
Saves settings to TM-T70-i.
Enter the current password.
Enter the new password.
Enter the new password for confirmation.
Saves settings to TM-T70-i.
Description
Description
Description