Web Service Settings - Server Access - Status Notification - Epson OmniLink TM-T70-i Technical Reference Manual

Web Service Settings - Server Access - Status Notification

You can set Status Notification for the TM-T70-i.
Item
Status Notification
ID
Password
URL
Interval(s)
Authenticate Server
Apply
Chapter 3
Sets whether to use the Status Notification function or not.
Select [Enable] or [Disable].
Set ID for the server-side program to identify TM-T70-i when [Status
Notification] is set to [Enable]. This ID becomes the user ID used for
Digest access authentication. The set value will also be passed as an
ID parameter value for the form data posted to the server.
Set the user ID and password used for Digest authentication. Make
sure to set a password as Digest authentication cannot be performed
for the user ID without a password.
Specify the Test_print.php address of the Web server when [Status
Notification] is set to [Enable].
Example: http://[IP address of the Web Server]/Test_status.php
Click the [Access Test] button to check if the address is accessible.
Set the request interval when [Status Notification] is set to [Enable].
Sets whether the server authentication is performed with the
registered certificate when accessed through https.
Saves settings to TM-T70-i.
Application Development Information
Description
3
87