Epson Tmnet Webconfig; Starting Epson Tmnet Webconfig; Help Screen Display; Version Screen Display - Epson OmniLink TM-T70-i Technical Reference Manual

EPSON TMNet WebConfig

EPSON TMNet WebConfig is a Utility to set the product on a web browser.
This section describes EPSON TMNet WebConfig using Internet Explorer as a browser.

Starting EPSON TMNet WebConfig

Follow the steps below to start up EPSON TMNet WebConfig.
1
Start up a PC connected to the network.
2
Start up the web browser, and input the following.
When SSL is disabled: http://[This product's IP address]/webconfig
When SSL is enabled: https://[This product's IP address]/webconfig
EPSON TMNet WebConfig starts.

Help Screen Display

Click [Help] to display the help screen for EPSON TMNet WebConfig.

Version Screen Display

Click [About] to display the version screen for EPSON TMNet WebConfig.
76
 For the product's IP address, see the status sheet. For the status sheet, see
firming with a status sheet" on page
 A user name and a password will be required on the authentication screen. Enter
"epson" for both the user name and the password. You can change the password on
the [Password Setting] screen (see
Password" on page 94.).
47.
"Admin Settings - Administrator Information -
"Con-