Epson OmniLink TM-T70-i Technical Reference Manual page 19

Without a Serial port
Drawer kick
connector
Ethernet port
DC-In (24V)
connector
Name
Drawer kick connector
LAN connector
USB connector
(for optional products)
Micro-USB connector
(for optional products)
Power supply connector for
DC 5V
Power supply connector for
DC 24V
microSD card slot
Analog RGB port
 When connecting USB interface devices, make sure to check the devices or manuals,
etc. for current consumption. The total value should be 2.0 A or less. Never use
devices that provide no information on current consumption.
CAUTION
 Make sure that the protective cover is securely fit into place while the product is oper-
ating.
 For Ethernet ports, make sure that the outdoor aerial LAN cables are connected
through a surge protector. Failure to do so may lead to device error resulting from
indirect lightning.
For the Micro-USB port, use a Micro-USB (Type Micro-B) cable.
microSD card slot
Analog RGB
port
USB port
Connects a cash drawer.
Connect the LAN cable here to connect to the network.
Connects optional products.
Connects the product to a computer to set up the product.
Connects a AC adapter,RA.
Connects a AC adapter,RA.
When using the PHP function with the firmware version 2.0 or later.
Currently not available.
Chapter 1
Micro-USB port
Protective cover
USB port
DC-In (5V)
connector
Description
Product Overview
1
19