Easy Setup
Easy setup is a function that allows you to set the EPSON TMNet WebConfig by simply inserting a
USB memory stick and turning on the power. The USB memory stick should contain a file
(setting.ini) with the setting values for EPSON TMNet WebConfig and a file with web content.
When a TM printer connected from TM-i via the network is used, it is also possible to configure the
network settings such as the IP address for the TM printer at the same time.
For detail, refer to "TM-i series Easy Setup Guide".
Checking/Updating TM-i Firmware
Checking the TM-i Firmware Version
• Use "Software" in the status sheet
• Use "General" in EPSON TMNet WebConfig
Updating TM-i Firmware
You can use the TM-i Firmware Update Tool to do the update.
For detail, see
"Software" on page
104
EasyKittingUtility.xls
USB Memory
setting.ini file
setting.ini file
-WebConfig
-IP address
Web contents file
Web contents file
(page
47)
74.
-WebConfig
-IP address
(page
77)