Error Status; Automatically Recoverable Errors; Recoverable Errors - Epson OmniLink TM-T70-i Technical Reference Manual

Hide thumbs Also See for OmniLink TM-T70-i:
Table of Contents

Advertisement

Error Status

There are three possible error types: automatically recoverable errors, recoverable errors, and
unrecoverable errors. Check the error LED flash code.
When connection to peripherals fails, check the status LEDs at the lower rear of the product.

Automatically Recoverable Errors

Printing is no longer possible when automatically recoverable errors occur. They can be recovered
easily, as described below.
Error
Roll paper cover
open error
Print head
temperature
error

Recoverable Errors

Printing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power on again after eliminating the cause of the error.
Error
Autocutter error
Error description
The roll paper cover was
opened during printing.
A high temperature
outside the head drive
operating range was
detected.
Error description
Autocutter does not
work correctly.
Error LED flash code
LED ON
LED OFF
Approx. 160 ms
LED ON
LED OFF
Approx. 160 ms
Error LED flash code
LED ON
LED OFF
Approx. 160 ms
Approx. 2560 ms
Chapter 1
Product Overview
Recovery measure
Recovers automatically
when the roll paper
cover is closed.
Recovers automatically
when the print head
cools.
Recovery measure
Remove the jammed
paper or foreign matter
in the printer, close the
roll paper cover, and
then turn the power on to
recover.
23
1

Advertisement

Table of Contents
loading

Table of Contents