Epson OmniLink TM-T70-i Technical Reference Manual page 72

 When this product is turned off, data in the spooler and the log storage area is cleared.
 When printing cannot be performed with this products spooler or print forwarding, the print
 Print data that is too large for the remaining free space in the spooler is cleared. For the
 If the number of job IDs exceeds the maximum storage number, the IDs are overwritten start-
 You cannot check the print results such as the spooler print data or job IDs from EPSON
• (1): TM-i firmware Ver. 4.0:
TM-i firmware Ver. 4.1 or later: [JobID, Print result = true] is returned to the application.
• (2): TM-i firmware Ver. 4.0:
TM-i firmware Ver. 4.1 or later: [JobID, Print result = false, Error code = Printer status] is
• (3): The remaining free space in the spooler and the size of the print data is checked, and the
product determines whether or not the print data can be spooled.
• (4): If the print data cannot be spooled, the print data is cleared. [JobID, Print result = false, Error
code = EX_SPOOLER (spooler stopped)] is returned to the application.
This data is not stored in the product's spooler or the log storage area.
• (5): When print data can be spooled, [JobID, Print result = true] is stored in the spooler. [JobID,
Print result = true] is also returned to the application.
• (6): Make the reprint settings (number of times and interval) in EPSON TMNet WebConfig. For
details, see "Web Service Settings - Spooler - Settings" on page
• (7): When printing is successful, the spooler's print data and [JobID, Print result = true] are
deleted. [JobID, Print result = true] are stored in the log storage area of this product.
• (8): Make the print forwarding location settings in EPSON TMNet WebConfig. For details, see
"Web Service Settings - Spooler - Print forwarding" on page
• (9): When printing fails, the spooler's print data and [JobID, Print result = true] are deleted. [JobID,
Print result = false, Error code = Printer status] are stored in the log storage area of this
product.
• (10): Make the forwarding message settings in EPSON TMNet WebConfig. For details, see
Service Settings - Spooler - Print forwarding" on page
72
data is cleared. If printing has not been completed when checking in the application, we rec-
ommend reprinting.
spooler capacity, see "Software Specifications" on page
ing with the oldest first. For the maximum storage number, see
page 110.
TMNet WebConfig.
[Print result = true] is returned to the application.
[Print result = false, Error code = Printer status] is returned
to the application.
returned to the application.
110.
"Software Specifications" on
83.
84.
84.
"Web