Easy Setup; Checking/Updating Tm-I Firmware; Checking The Tm-I Firmware Version; Updating Tm-I Firmware - Epson TM-T20II-i Technical Reference Manual

Easy Setup

Easy setup is a function that allows you to set the EPSON TMNet WebConfig by simply inserting a
USB memory stick and turning on the power. The USB memory stick should contain a file
(setting.ini) with the setting values for EPSON TMNet WebConfig and a file with web content.
When a TM printer connected from TM-i via the network is used, it is also possible to configure the
network settings such as the IP address for the TM printer at the same time.
For detail, refer to "TM-i series Easy Setup Guide".

Checking/Updating TM-i Firmware

Checking the TM-i Firmware Version

• Use "Software" in the status sheet
• Use "General" in EPSON TMNet WebConfig

Updating TM-i Firmware

You can use the TM-i Firmware Update Tool to do the update.
For detail, see "Software" on page
124
USB Memory
EasyKittingUtility.xls
setting.ini file setting.ini file
-WebConfig
-IP address
Web contents file Web contents file
(page 58)
90.
-WebConfig
-IP address
(page 93)