Replacing A Card - HP 12500 Series Installation Manual

Figure 67 Removing the PEM
Figure 68 Installing the PEM

Replacing a card

All cards of the 12500 are hot-swappable.
Preparing for the replacement
Put on an ESD-preventive wrist strap, and make sure the wrist strap makes good skin contact and
1.
is well grounded.
Unpack the card to be installed. If the card has a protection cover, remove it first.
2.
Figure 69 Removing the protection cover
1
Remove the network cables and power cords from the card to be removed.
3.
1
90
2
2