Hardware Management - HP 12500 Series Installation Manual

Hardware management

This chapter describes the hardware management functions that the switch provides. With these functions,
you can conveniently view the operating status of your switch, and manage and routinely maintain the
hardware modules of your switch.
NOTE:
The CLIs and examples in this chapter are based on software version R7128.
•
• The output depends on your switch model.
Displaying the electrical label data for your switch
Electrical label data is also called permanent configuration data or archive information, which is written
to the storage component of a card during device debugging or testing.
Use the display device manuinfo command to display the electronic label data for your switch, including
the card name, serial number, MAC address, manufacturing date, and vendor name.
# Display the electrical label information about the card in slot 0 on your switch.
• In standalone mode:
<Sysname> display device manuinfo slot 0
Slot 0:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : CN20FYD002
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
In Intelligent Resilient Framework (IRF) mode:
•
<Sysname> display device manuinfo chassis 1 slot 0
chassis 1
slot 0:
DEVICE_NAME
DEVICE_SERIAL_NUMBER : CN20FYD002
MAC_ADDRESS
MANUFACTURING_DATE
VENDOR_NAME
Table 16 Command output
Field
Slot 3
Chassis 1
: HP 12500 Type A MPU w/Comware v7 OS JG497A
: D07E-2848-3600
: 2012-10-21
: HP
: HP 12500 Type A MPU w/Comware v7 OS JG497A
: D07E-2848-3600
: 2012-10-21
: HP
Description
Slot number of a card.
ID of the member switch where the card resides.
60