Installation Tools - HP 12500 Series Installation Manual

Figure 21 Rack depth
The rack is available with standard slide rails (or rack shelves), cage nuts, and screws.
•
The slide rails (or rack shelves) can support the weight of the switch chassis and its accessories.
•
The rack can be well grounded.
•
• The rack has good cooling system, and the porosity of the front and back doors is greater than
50%.

Installation tools

You can use the following tools for installation.
Accessories supplied by the switch
Item
Console cable
Grounding cable
Mounting brackets
M4*8 screw
M6*12 screw
M6 cage nut
Air deflector
Quantity
1
1
1 pair
1 set
1 set
1 set
1
23
Purpose
Connecting the console port and the
configuration terminal for switch login
Grounding the switch
Fixing the switch to the rack
Fixing the mounting brackets to the
switch
Fixing the switch to the rack
Installed at the rear of the chassis to
block air from entering the chassis
(optional for the 12508 and 12518,
not available for the 12504)