Fan Leds - HP 12500 Series Installation Manual

LED
Output
Service
Fault

Fan LEDs

Table 45 Fan LED description
LED
RUN
ALM
MPU LEDs
Figure 80 MPU LEDs
(1) CF card status LED (CFS)
(4) Fan status LED (FAN)
(7) MPU status LED (RUN)
Status
Off
Flashing
Steady on
Off
Flashing
Steady on
Off
Steady on
Off
Status
Off
Flashing
Off
Flashing
Steady on
9
1
(2) Switching fabric module LED (SFC)
(5) Power status LED (PWR)
(8) Network management port LED (LINK)
Description
No power is being input.
The input power has exceeded the threshold.
The power is being output properly.
No power is being output.
The power output is overloaded.
The AC power supply is experiencing an over-temperature condition.
The AC power supply is operating properly.
The AC power supply is faulty.
The AC power supply is operating properly.
Description
The fan tray has failed.
The fan tray is operating properly.
The fan tray is in a normal state.
The fan tray is faulty.
The fan tray is faulty.
112
8
2 3 4 5 6 7
(3) LPU status LED (LC)
(6) MPU status LED (ACT)
(9) Network management port LED
(ACT)