Replacing A Cf Card - HP 12500 Series Installation Manual

Loosen the captive screws on the fan tray.
1.
Pull out the fan tray along the slide rails. Put the removed fan tray in an antistatic bag or in its
2.
original shipping materials.
Insert the new fan tray into the fan tray slot along the slide rails. Push the fan tray in the slot until
3.
it makes close contact with the backplane of the chassis.
Finger-tighten the captive screws and then use a screwdriver to fasten the screws to make sure the
4.
fan tray is firmly fastened.
Figure 72 Replacing a fan tray (for the 12504)
A: Fan tray to be removed
Figure 73 Replacing a fan tray (for the 12508 and 12518)
A: Fan tray to be removed

Replacing a CF card

B: Fan tray to be installed
B: Fan tray to be installed
94