Features & Operating Controls; Power Switch - Wells WFAE55F Owner's Manual

FEATURES & OPERATING CONTROLS
Fig. 1 WFAE-55F Features & Operating Controls

POWER SWITCH

1
(FRYER-OFF-FILTER)
POWER LIGHT (amber)
2
HEAT LIGHT (amber)
3
COOK LIGHT (amber)
4
5 TIMER
BUZZER LIGHT (amber)
6
7 BUZZER SWITCH
FILTER PUMP SWITCH
8
(ON-OFF)
9 HI-LIMIT THERMOSTAT
TEMPERATURE
10
CONTROL THERMOSTAT
FRYER position energizes the fryer and power light; de-energizes filter pump.
Heating elements energized and regulate to setting on CONTROL thermostat (8).
OFF position de-energized fryer and filter pump.
FILTER position de-energizes fryer; energizes filter pump switch (6).
Glows to indicate fryer is energized.
Glows to indicate heating element energized;
Off when oil temperature reaches setting on control thermostat (8).
Glows to indicate COOK LEVER in cook position.
Controls LIFT CRADLE and BUZZER. Start TIMER by pressing red button at center
of knob. Lift CRADLE will lower. Pointer indicates time remaining. When time
reaches "0" BUZZER sounds and LIFT CRADLE raises.
When lit, indicates BUZZER SWITCH (item 7) is turned ON and BUZZER CIRCUIT
is active
Activates BUZZER CIRCUIT. When ON will sound BUZZER anytime TIMER is at
"0". Turn switch OFF or activate timer to silence buzzer.
ON position energizes filter pump and causes oil in reservoir (10) to be pumped
back into frypot.
OFF position de-energizes filter pump.
NOTE: power switch (1) must be in FILTER position for filter pump to operate.
Provides over-temperature protection by de-energizing HEATING ELEMENTS
should oil temperature exceed factory pre-set limits.
Controls oil temperature. Range: 250ºF (121ºC)
2
375ºF (191ºC)
IL2553