Table of Contents
Advertisement
PREPARATION PRIOR TO OPERATION (continued)
IMPORTANT:
Serious damage to the frypot
will result if the rollers are
missing or do not rotate freely.
RETAINING NUT
ROLLER
Examine the CRADLE ROLLERS. Adjust or tighten as required.
Lubricate the rollers with vegetable oil.
DO NOT operate the fryer unless CRADLE ROLLERS are in place
and rotating freely.
IL2558
Install LIFT CRADLE onto CRADLE PIVOT. Set FRY BASKET on
LIFT CRADLE.
FILTER RAIL "A"
UPPER
RESERVOIR
FILTER SCREEN
CROSS-SECTION VIEW
SEPARATOR
LOWER
FILTER SCREEN
FILTER RAIL "B"
Note: "O" RING
"O" RING
SPARE
"O" RING
FILTER
RESERVOIR
ASSEMBLED FILTER LEAF
(spout with O-RING inserts
into drain opening)
Install FILTER LEAF into FILTER RESERVOIR.
SUCTION TUBE O-RINGS are shipped from the factory installed on
SUCTION TUBE; Examine to verify one O-RING is in the groove
closest to the end of the tube.
Install assembled FILTER RESERVOIR into fryer. O-RING for the
filter reservoir suction tube, and up to three spare O-RINGS, are
stored as shown above.
11
ASSEMBLY
STORAGE FOR 3
SPARE "O" RING
IL2559
"O" RING IN
"O" RING GROOVE
IL2560
Advertisement
Table of Contents
