Department Status Programming - TEC EO1-11115 Owner's Manual

Department Status Programming:

To use Department Keys, program how each Department Key is to be used, in accordance with
merchandise categories, operativity of the key, etc.
Condition: After Daily Financial Reset and Periodical Financial Reset (and All PLU Reset if the positive/
negative status is to be set), or Any time outside a sale for other status changes. (refer to
"NOTE on Condition" on page 15)
Programming Procedure:
Use the MA Key to turn the Control Lock to "SET".
X
REG
Z
OFF
SET
Depress the required key(s) to obtain the appropriate
status for the department:
RTN
MDSE
TX1/M
TX2/M
GST/M
1
2
4
5
0
@/FOR
3
Declaration of Program No. 3
for Department Status
programming
To set Negative status
NOTES 4, 5
To set Tax 1 taxable status
NOTES 1, 3
To set Tax 2 taxable status
NOTES 1, 3
To set GST taxable status
NOTES 1, 4
To set Single-item Key status
To set Itemized Key status
To set Other Income Dept. with
Itemized Key status
To set Other Income Dept. with
Single-item Key status
To regain the initial statuses, i.e., Positive, Non-
taxable, Non-GST and Itemized statuses); it may be
useful when you are confused with various status
selections for a department.
- 32 -
Repeat for programming
other Department Keys.
The status is re-
versed by press-
ing the same key
again.
NOTE 2
Key Type status
(
NOTE 6
EO1-11115
MA-186-100 SERIES
Depress the [DPT
SHIFT] key to set
the Department
Nos. 21 to 40.
NOTE 7
DPT )
SHIFT
Depress the De-
partment Key to
obtain the selected
statuses.
NOTE 3
Dept.
To complete this
AT/TL
operation and
issue a program
receipt