Address: 7 - TEC EO1-11115 Owner's Manual

Address: 7
([CHK TND] Key Function)
Bit
No.
Tender and Total Functions in finalizing a sale in REG
1
mode
-- vacant --
2
Cashing with no purchase, using this key
3
Over-tendering (tendering an amount larger than the sale
4
total, resulting in calculation of change due)
-- vacant --
5 to 8
Supplementary Description for Address 7:
Bit 1:
Bit 3:
Bit 4:
Initial SET Bit Nos.
Your Selection
Content
Refer to the "Supplementary Description" of Bit 1 attached to Address 6 on the
preceding page.
RESET status .................... Customers' checks cannot be cashed outside a sale.
SET status.......................... Customers' checks can be cashed with no purchase
This Bit status selection is effective only in tendering operation.
SET status.......................... If this bit is SET and also Address 11 - Bit 1 is SET (for
TENDER or
PROHIBITED
ALLOWED
outside a sale.
Short-tendering Prohibited), an amount equal to the sale
total is always required for tendering.
- 75 -
MA-186-100 SERIES
Selective Status
RESET SET
TENDER only
TOTAL
ALLOWED
PROHIBITED
EO1-11115
1 3