Address: 8 - TEC EO1-11115 Owner's Manual

Address: 8
([Chg] Key Function)
Bit
No.
Tender and Total Functions in finalizing a sale in REG
1
mode
-- vacant --
2
Cashing with no purchase, using this key
3
Over-tendering (tendering an amount larger than the sale
4
total, resulting in calculation of change due): effective only
when Bit 1 is RESET
-- vacant --
5 to 8
Supplementary Description for Address 8:
Bit 1:
Bit 3:
Bit 4:
-- Addresses 9, 10 are vacant. --
Initial SET Bit Nos.
Your Selection
Content
RESET status .................... The key functions as Tender Key with a prior amount
SET status.......................... The key functions as Total Key only.
RESET status .................... Cashing with no purchase is prohibited.
SET status.......................... Cashing with no purchase is allowed outside a sale.
This Bit status selection is effective only in tendering operation and only when Bit 1 is
RESET.
SET status.......................... If this bit is SET and also Address 11 - Bit 1 is SET (for
TENDER or
PROHIBITED
ALLOWED
entry or as Total Key without any amount entry.
Short-tendering Prohibited), an amount equal to the sale
total is always required for tendering.
- 76 -
MA-186-100 SERIES
Selective Status
RESET SET
TOTAL only
TOTAL
ALLOWED
PROHIBITED
EO1-11115
1