TEC EO1-11115 Owner's Manual page 100

Ribbon detector
Ribbon buffer Ribbon
REG
OFF
Spool
X
Z
SET
4
Install one of the ribbon spools as shown
in the figure while moving the ribbon de-
tector so that the ribbon is not caught.
5
Thread the ribbon around the ribbon
buffer, and then install the other ribbon
spool while pushing the ribbon detector
aside so that it may not catch the spool.
6
Turn the ribbon spool several times to re-
move the slack in the ribbon. (Select the
ribbon spool which rotates in the direc-
tion of the arrow shown in the figure.)
7
After replacing the ink ribbon, attach the
Printer Cover, then turn the Control Lock
to the REG position using the Control
Key. Depress the [NS] key to check the
print condition.
- 94 -
EO1-11115
MA-186-100 SERIES