TEC EO1-11115 Owner's Manual page 54

% Key Operations in Sale Entries
Use the REG Key turn the Control Lock to "REG".
X
REG
Z
OFF
SET
Department or
PLU Item Entry
Sale Item
Entries
NOTES: 1. Manual Rate... Max. 5 digits (Max. 2 digits for integer + max. 3 digits for decimal. Use the [.] key
if a decimal portion is contained.)
2. When a rate is manually entered through a % key preset with a rate, the manual rate prevails.
3. A % entry will cause an error if operated after a Negative Department or an Other Income
Department entry.
4. A % entry after obtaining a Subtotal is usually allowed only once. However, it can be programmed
to allow multiple times. (Refer to Chapter "16. System Option Setting", Address 16 - Bit 2 on
page 81.)
5. You can select the rounding process of the fractions of the product (result of % calculation) —
ROUND OFF (initial setting), ROUND UP, or ROUND DOWN. (Refer to Chapter "16. System
Option Setting", Address 2 - Bits 1 and 2 on page 72.)
6. Each of the % keys has its own Tax (PST) Status and GST Status programmed. Refer to "Tax
Status Modification" on page 56 for reversing the status.
%-
(or
. . .
Manual Rate
ST %-
. . .
Manual Rate
- 48 -
%+
) .................................. for the Preset Rate
%- (or %+
0 1 6.0 0
5.
-0.3 0
%+
(or ) .......................... for the Preset Rate
(or
%- %+
15.0 0
10.
1.5 0
EO1-11115
MA-186-100 SERIES
) ........ for the Manual Rate
Dept 1 $6.00
% -
5% on $6.00 = $0.30
is discounted.
) .. for the Manual Rate
Subtotal $15.00
obtained
% +
10% on $15.00 =
$1.50 is added.