Remote Slip Printer Motor Lock Detector; Printer Head Open Detector - TEC MA-1595-1 Series Owner's Manual

13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR

13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
(1) This detects the remote slip printer motor lock condition caused by some trouble.
(2) When such a condition is detected, the front display indicates "SLIP OFF LINE" and none of the keys
(including [RF] and [JF]) will be accepted.
(3) To regain the normal condition, turn the powers of the ECR and the remote slip printer to OFF, remove the
cause of the motor lock, and then turn the powers to ON again.
* If the cause cannot be found in the remote slip printer and only the ECR may be required to work temporarily
without the remote slip printer, remove the remote printer cable from the ECR, and turn the power of the ECR
to ON.

14. PRINTER HEAD OPEN DETECTOR

(1) This detects the printer head open condition.
(2) When such a condition is detected, the front display indicates "Error" and none of the keys (including [RF] and
[JF]) will be accepted.
(3) To regain the normal condition, turn the power of the ECR to OFF, close the printer guide, and then turn the
power to ON again.
13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
13- 1
EO1-11152