TEC MA-1595-1 Series Owner's Manual page 148

6. PROGRAMMING OPERATIONS
• Tare Table and General Unit Weight Setting
26 [X] | Tare Table No. | [ST]
1 digit (1 to 9)
NOTES: 1. General Unit Weight Code as follows.
General Unit
Weight Code
2. The initial value for the General Unit Weight is set to Code 1 (1LB or 1Kg).
Example) To set the following:
Tare Table No. 1 with Tare Weight 13 grams,
General Weight 100 grams (Code 10).
Key Operation: Mode Lock: SET, Enter 26 and depress the [X] key.
1 [ST]
13 [#]
10
[AT/TL]
Repeat for other tables
*
| Tare Weight | [#]
(Unit: 1/00 LB or gram.)
(Example: enter 13 for
0.13 LB or 13 grams.)
LB Unit
1 1LB
2 2LB
3 3LB
4 4LB
5 5LB
6 6LB
7 7LB
8 8LB
9 9LB
10 1/2LB
11 1/4LB
(Tare Table No.)
(Tare Weight)
(General Weight Code)
to complete this submode
6.13 Tare Table and General Unit Weight Setting (Submode 26)
* (For sequentially programming
tables, the Table No.
specification can be skipped.)
| General Unit Weight Code |
1 to 11 ( NOTE 1 below)
0 to 999
Kg Unit
1Kg
2Kg
3Kg
4Kg
5Kg
6Kg
7Kg
8Kg
9Kg
100g
6-31
EO1-11152
[AT/TL]
7(& 6725( 7(& 6725(
3 3