Programming Operations Added For In-Line Terminals - TEC MA-1595-1 Series Owner's Manual

5. PROGRAMMING OPERATIONS

5.2 Programming Operations Added for In-line Terminals

5.2.1 Terminal Connection Table Setting (Submode 69)
This submode is required for In-line services. The In-line ID No., Register No. and IP Address of each terminal
(including the Master Terminal) can be programmed here.
CONDITION
OPERATION
69 [@/FOR] |In-line ID No.| [ST]
2 digits (01 to 16)
( NOTES 1 & 2 below)
Repeat for other terminals to be connected, including the Master Terminal itself. (Max. 16 terminals)
NOTES: 1. In-line ID No.:
2. The In-line ID No. and Register No. of each terminal to be set here must be the same as those
programmed for the terminal in IN-LINE TERMINAL ID SETTING (Submode 77) in this chapter
and STORE/REGISTER NO. SETTING (no submode) in Chapter 6 of the Programming Manual
for stand-alone level.
3. IP Address: 12 digits (000.. 000 to 255.. 255)
ex) To set the IP Address 192.168.0.252..........Enter 192168000252
4. To delete an individual terminal from the Terminal Connection Table, enter 0 in place of the In-
line ID No., then enter Register No..
69 [@/FOR]
5. To delete the entire Terminal Connection Table once set, operate:
69 [@/FOR]
6. If a deleting operation (individual or entire deletion) is performed, the files occupied by the
deleted terminal(s) (such as Floating Cashier File, etc.) is canceled.
operation should be performed only when the system is to be re-built or a terminal is to be
detached from the system.
Example)
To set Master Terminal and Satellite Terminal in the Connection
Table (total of two terminals in the in-line system):
Master Terminal
Satellite Terminal
Key Operation: Mode Lock SET and IN-LINE Lamp illuminated,
enter 69, depress [@/FOR].
01 [ST]
111101 [#]
192168000251 [#]
03 [ST]
333303 [#]
192168000253 [#]
[AT/TL]
Any time outside a sale
Mode Lock: SET and IN-LINE Lamp illuminated
*
Master Terminal ... 01 (fixed)
Backup Master Terminal (if connected) ... 02 (fixed)
Satellite Terminals ... 03 to 16 (max. 14 terminals)
0 [ST]
0 [AT/TL]
In-line ID No. 1
In-line ID No. 3
(Master In-line ID No.)
(Master Register No.)
(Master IP Address)
(Satellite In-line ID No.)
(Satellite Register No.)
(Satellite IP Address)
(Complete this Submode)
5.2 Programming Operations Added for In-line Terminals
|Store/Register No.| [#]
Max. 6 digits
0 to 999999
( NOTE 2 below)
|Store/Register No.| [#]
Register No. 111101
Register No. 333303
5- 2
|IP Address| [#]
12 digits
( NOTE 3 below)
[AT/TL]
Therefore, a deleting
IP Address 192.168.0.251
IP Address 192.168.0.253
EO1-11152
[AT/TL]
* For sequentially
programming In-
line ID Nos, the In-
line ID specification
can be skipped.