Comment Print - TEC MA-1595-1 Series Owner's Manual

10. REGISTERING PROCEDURE AND PRINT FORMAT

10.63 Comment Print

OPERATION
Print of the programmed message
|Comment Message Code| [COMMENT] .............. Programmed message corresponding to the designated
1 to 10
Print of a message using character code entry
[COMMENT]
Example) Character code "00" is assigned to "SPACE".
Character code "34" is assigned to "B".
NOTES: 1. This operation is available any time outside a sale or inside a sale including during the short
tendering condition, however except the following.
During the Loan transaction
During the Pick Up transaction
During the Paid Out transaction
2. Neither the Item Correct transaction nor the Validation Print is effective for this operation.
Character Code Entry
(Max. 32 characters; 2-digit
code is assigned to each
character as shown on the
table below.)
code is printed on the receipt and the remote slip.
[COMMENT] .................. Message entered by
10-44
EO1-11152
10.63 Comment Print
character code is printed on
the receipt and the remote
slip.