Tax Table Setting - TEC MA-1595-1 Series Owner's Manual

6. PROGRAMMING OPERATIONS
Key Operation: Mode Lock: SET
1 [.] 0914 [CUR 1] (for EURO)
1 [.] 1710 [CUR 2] (for Japanese yen)
Resetting a Foreign Currency Rate Once Set:
Enter "0" in place of the Exchange Rate for the Foreign Currency in the setting operation. Then the rate for that
foreign currency will be reset. The Foreign Currency Key of the rate thus reset cannot be used in sales entries.
6.23

TAX Table Setting

A maximum of four tax tables can be programmed (Tax 1, Tax 2, Tax 3, Tax 4) in accordance with installation of
[TX1/M], [TX2/M], [TX3/M], [TX4/M] keys.
CONDITION
OPERATION
TYPE 1: TAX 1 FULL BREAKS (COMBINATION OF NON-CYCLIC AND CYCLIC BREAKS)
| Max. amount non-taxable | [TX1/M]
| Max. amount for 1 ¢ tax levied | [TX1/M]
| Max. amount for 2 ¢ tax levied | [TX1/M]
Repeat up to the "A" Break
| Max. amount for N¢ tax levied | [TX1/M] .. ... "A" Break (Non-cyclic Break Limit)
[ST] (to indicate the completion of Non-cyclic Breaks)
| Max. amount for N + 1¢ tax levied | [TX1/M] (beginning of Cyclic Breaks)
| Max. amount for N + 2¢ tax levied | [TX1/M]
Repeat up to the "B" Break ("B" Break - "A" Break + Multiple of $1.00; max. $9.00)
[AT/TL] (to complete this tax table programming)
NOTE: The break amount entry must be a maximum of 4 digits (1 to 9999 resulting in $0.01 to $99.99)
After Financial Daily Reset
Mode Lock: SET
7(& 6725( 7(& 6725(
6-45

6.23 TAX Table Setting

7(& 6725( 7(& 6725(
3 3
3 3
EO1-11152