Daily Operation Flow - TEC MA-1595-1 Series Owner's Manual

1. DAILY OPERATION FLOW

1. DAILY OPERATION FLOW
In a Master-Satellite System, a certain order of jobs on the Master and Satellite terminals are provided. If the
necessary jobs are not proceeded in the correct order, sale entries may not be operated or report collections may
not be possible. The following chart shows the basic daily operation flow on the Master and Satellite terminals.
MASTER TERMINAL
Turn ON the power of every ECR in the in-line system.
First turn ON the power of the Master terminal, and then the power of each
Satellite terminals.
Operate TERMINAL OPEN CHECK
to check all the terminals are correctly
connected (Chapter 2):
Mode Lock: X/RTR Declaration: ON
Operate DATE AND TIME DLL to
synchronize the date and time of Satellite
terminals to that of the Master terminal
(Chapter 6):
Mode Lock: SET/RTR Declaration: ON
STORE OPEN
Sign-ON, Sale Entries, Sign-OFF
Refer to the OPERATOR'S GUIDE for the Standalone Level.
Read (X) Report Takings on Individual Terminals
Refer to Section 5 in this manual and MANAGER'S GUIDE for the
Standalone Level.
In-line Read Report Takings on Master
Terminal.
Refer to Section 4.2 in this manual.
80 [AT/TL]
505 [AT/TL]
(To be continued on the next page.)
SATELLITE TERMINALS
1- 1
EO1-11152
1. DAILY OPERATION FLOW