Registering Procedure And Print Format - TEC MA-1535 series Owner's Manual

Electronic cash register
Table of Contents

Advertisement

9. REGISTERING PROCEDURE AND PRINT FORMAT

9. REGISTERING PROCEDURE AND PRINT FORMAT
When opening the cash drawer, be careful not to let the drawer hit any person.
Before starting sale entries, read through the following instructions:
TRAINING MODE is available:
If you are a beginner in operating this register, ask the store manager for practicing in the TRAINING
MODE.
During your operations, the following may occur:
• Errors ...
A tone continuously sounds and an error message appear in the upper row of the Operator Display
panel.
The keys on the keyboard are locked. In this case, read the Error Message (refer to the ERROR
MESSAGE TABLE, Section 5.1), and depress the [C] key to cancel the error status. Then remove the
cause of the error and perform the operation again.
• Printer Error Condition is detected ...
If the error message "PRINTER" (standard setting: programmable) is displayed in the upper row and
"E05" is displayed in the lower row, the printer is locked due to a paper jam, etc. Turn OFF the power,
and remove the cause of the motor-lock. Refer to Sections10 and 11.
Condition setting to start transaction entries
Mode Lock:
Cashier Sign-ON:
Now you are ready for sale entries.
On the following pages are patterns of entering operations, and receipt or journal print format samples
due to the operations. In the operation sequence patterns, "| |" indicates an input through the numeric
keys, "[ ]" indicates a depression of the function key, and "- - - - -" indicates other registering and/or
finalizing operations.
Please note that these are merely sample operations. Especially, the receipt or journal print indications
merely show the standard print format. The actual print format and contents may vary on your machine
in accordance with the differences in specifications, program selections, etc.
WARNING!
Insert the "REG" key and set it to the "REG" position.
To start a registering operation, it is necessary to sign on with the
[LOG/RECEIPT] key. (See Section 7.)
9- 1
9. REGISTERING PROCEDURE AND PRINT FORMAT
EO1-11148

Advertisement

Table of Contents
loading

Table of Contents