Chapter 3│Drive Installation; Installation Environment - LiteOn EVO600021S0D2E20F User Manual

Chapter 3│Drive Installation

3.1 Installation Environment

To ensure the optimum drive performance, install the AC drive in a proper environment
specified below.
Environment
Area of Use Indoors
-10°C to +50°C (IP20 enclosure)

Do not install the drive in environments with wide temperature fluctuations

so as to ensure the drive reliability.
When the drive is installed in an enclosure cabinet, make sure the cooling

Ambient
works properly to keep the temperature within the specified levels.
Temperature
Do not allow the drive to freeze.

When drives are installed side-by-side in a cabinet, follow the instruction

illustrated in Figure 3.2 to ensure the air flow.
Under 90% RH

Humidity
Free of condensation

Storage
-20°C to +60°C
Temperature
Free from water, oil, metal shavings or other foreign materials.

Free from flammable materials (e.g., wood)

Free from harmful gases and liquids

Surrounding
Free from direct sunlight

Area
Free from oil mist, corrosive gas, flammable gas or dust.

Free from radioactive material

Green Class 2 or above

Up to 1000 m without derating. Up to 2000 meters with 1% rated current
Altitude
derated for every 100 m counted from 1000 m.
10 to 20 Hz at 9.8 m/s2

Vibration
20 to 55 Hz at 5.9 m/s2

Enclosure IP20
Conditions
17