Group D, Motor Parameters - LiteOn EVO600021S0D2E20F User Manual

Frequency
command
L6-01 Offset
Frequency 1
(Signed)
L6-02 Offset
Frequency 2
(Signed)
L6-03 Offset
Frequency 3
(Signed)

6.5 Group d, Motor Parameters

d parameters set the V/F characteristics and motor parameters.
d1- 00 Input Voltage Setting

Sets this parameter to match the input voltage of the drive as the base for detections such as
ov (Overvoltage) and Uv (Undervoltage).
Notice: To ensure the drive protection functions work properly, a
motor) to this parameter.
No.
d1-00<1>
<1> This is for a 200 V AC drive. The value is doubled for a 400 V AC drive.
□ Values Related to Drive Input Voltage
The following detection levels are determined by the drive input voltage.
d1-00
Voltage
setting
200 V All settings
Multi-function input E1-□□ = 53 = ON
Multi-function input E1-□□ = 54 = ON
Multi-function input E1-□□ = 55 = ON
Figure 6.41 Offset Frequency Operation
d1 V/F Characteristics
Failure to comply could cause damage to the machinery or injury to personnel.
Name
Input Voltage Setting
ov Detection
Level
410 V
+
+
+
+
+
+
lways set the input voltage of the drive (not
Setting Range
155 to 255 V <1>
Approximate Values
P7-13
(Dymanic
Braking Level)
<1>
395 V
88
Frequency
Soft-start
command
after soft-start
P2-03
( UV Detection
Level)
190 V
Default
200 V <1>
P3-04
(Stall Prevention
Level during
Deceleration)
395