Removing Cooling Fan - LiteOn EVO600021S0D2E20F User Manual

shocks when touching the motor enclosure.
Do not touch any live components to avoid electrical shocks.

Do not tough the terminals. Avoid output cables contacting the drive enclosure.

Do not inspect or maintain the drive when waring loose clothing, jewelry or without eye protection.

Failure to comply could cause electrical shocks or inquiry.
Do not touch the drive heatsink which could be very hot during operation.

Do not replace the cooling fan until 15 minutes after shutting off the drive power and

making sure the heatsink is cooled down.
The cooling fan cannot operate properly when installed incorrectly and could damage the

drive. Follow the instructions when replacing cooling fans. For drives with multiple cooling
fans, replace all the cooling fans when performing maintenance to ensure maximum
product performance life.

9.3.2 Removing Cooling Fan

1 to 3HP
1. Depress the right and left sides of the cooling fan cover tabs and pull outward.
2. When the fan is pulled outward, disconnect the power cable.
175