Control Circuit - LiteOn EVO600021S0D2E20F User Manual

4.3 Control Circuit

RJ45 port can be connected to the built-in RS-485 communication or option

communication cards (options cards are under development)
Multi-function analog input S1 to S6 can be switched between Sink (NPN) mode and

Source (PNP) mode. The default setting is NPN mode.
DIP switch A1 is used to set the analog input type as voltage or current.

AC (Analog Common) is the common terminal of analog signal.

Analog output is used to connect a frequency meter, current meter, voltage meter and

power meter.
27