Table of Contents
Advertisement
PI_GB_PES_PDS_Art0015689_1v0.doc 3
1 x PES / PDS
1 x hexagonal angle screwdriver DIN 911
1 x screwdriver with round handle
nameplates, empty and with light symbol
product information
Assembly, installation, and commissioning must only be carried out by a qualified elec-
!
trician!
For work on systems with 230 V AC mains current the safety requirements of DIN VDE
0100 must be observed.
When installing TCS:BUS systems the general safety rules for telecommunication systems
in accordance with VDE 0800 must be observed:
• separate cabling for high and low voltage lines,
• minimum distance of 10 cm for joint cabling arrangements,
• use of separators between high and low voltage lines in joint cable ducts,
• use of standard telecommunication cables, e. g. J-Y (St) Y with 0.8 mm² cross section,
• existing cables (rationalisation) with different cross sections may be used whilst taking
account of the loop resistance.
Suitable lightning protection must ensure that a voltage of 32 V DC will not be ex-
!
ceeded at the TCS:BUS wires a and b.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
Scope of delivery
Safety notices
Subject to change without notice.
Art.Nr.
0015689 Version 1.0 mi
10/2005
Advertisement
Table of Contents
