Scope Of Delivery; Safety Notices - TCS VPES Series Product Information

1 x VPES / VPDS
1 x key for hexagon socket screws
1 x screwdriver with round handle
name plates, empty and with light symbol
product information
Assembly, installation and commissioning must only be carried out by a qualified elec-
!
trician!
For work on systems with 230 V AC mains voltage the safety requirements of DIN VDE
0100 must be observed.
When installing TCS:BUS systems the general safety rules for telecommunication systems
in accordance with VDE 0800 must be observed:
• separate cabling for high and low voltage lines,
• minimum distance of 10 cm for joint cabling arrangements,
• use of separators between high and low voltage lines in joint cable ducts,
• use of standard telecommunication cables, e. g. J-Y (St) Y with 0.8 mm² cross section,
• existing cables (modernisation) with different cross sections may be used whilst taking
account of the loop resistance.
Suitable lightning protection must ensure that a voltage of 32 V DC will not be ex-
!
ceeded at the TCS:BUS wires a and b.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
3

Scope of delivery

Safety notices

Subject to change without notice.
PI_GB_VPES_VPDS_Art0016079_2v0.doc mi
05/2006