Table of Contents
Advertisement
PI_GB_PES_PDS_Art0015689_1v0.doc 6
The PES / PDS are front-door stations for exterior use.
They are suitable for surface mounting.
Basic functions
Bell buttons
Saving the bell button alloca-
tions in the front-door station
Additional functions
Name plate illumination
connection
Allocation of serial number to
bell buttons
additional switching signal
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
Application
Brief description
• Operating a programmed bell button triggers a ringing
tone at the in-house station.
• Operating an unprogrammed bell button triggers the
light switch function in the power supply and control
unit.
• When operating a bell button an acknowledgement
tone sounds.
All programmed data (serial numbers and parameters)
are stored in the EEPROM. If the front-door station re-
quires replacement, the EEPROM board can be removed
from the programmed front-door station and inserted into
the new front-door station of identical design.
via LED, P-wire connection required.
• for Service Device
• for PES / PDS: for connection of a bell button exten-
sion PET / PDS.
2
use a combining device BRE2.
Subject to change without notice.
Art.Nr.
0015689 Version 1.0 mi
10/2005
Advertisement
Table of Contents
